Tools & Equipment
SQUEEGEE WAND 4 JET
Comparable units come with only half the features of this squeegee wand! This heavy duty wand is designed specifically for the stone restoration specialist to rinse slurry and abrasive residue from the work area. It is built to connect to a portable, truck mount, or configured to work with a pressure washer and vacuum source of 400 to 1200 psi. Unlike most wands, that move in one direction and can get sucked to the floor, make them hard to use, our wand glides with ease in both directions, thanks to two wheels with adjustable height.
M2 HD Polisher
Severe Duty Floor Machine
Polishing, Resurfacing, Stripping, Sanding
The M2 HD Polisher is built for high productivity in the harshest jobs like natural stone polishing, concrete resurfacing, wood screening and sanding. We fit the powerful 1.5 HP, 180 frame TEFC AC motor with 11:1 gears and industrial grade steel coupler. You will power your M2 without blowing breakers and reducing down time. The 100% steel construction is accented with three exterior decorations.
Power
- 1.5 HP, 180 frame, TEFC AC motor
- 115-230 V, 60 Hz, (50 Hz optional)
- 50 ft., (12-3) 2-piece industrial power cord with cord lock Drive System
- Triple-planetary XHD 11:1 helical-cut industrial gears, case hardened with steel coupler, driving brushes at 165 RPM
Safety
- Quiet 66 dB operation. Meets GS42 standard
- UL/CUL Listed
Design
- All steel welded construction
- Steel brush covers with full wraparound bumper
- One piece heavy-duty steel handle with variable position lock
- Dual steel operating triggers with negative pressure on/off switch
- Thumb-operated safety switch
- Comfortable vinyl-dipped foam handle grips
1” x 5” non-marking ball bearing wheels - 4 gallon solution tank
- 50 lb. Removable horseshoe weights (optional)
CP Polisher
Dual Head Polisher-Edger
Counter Tops, Edges, Small Areas
The CP Polisher was born out of need for affordable compact power. Dual 1/8 HP motors spin twin heads at 500 RPM in opposing direction. The result is very controllable polisher with a low center of gravity.
The CP Polisher is small enough to work on counter tops but large enough to polish a small bathroom floor. Available in three sizes. The 36” removable handle (optional) mounts over the hand grips and lets you stand while using the CP Polisher as an edger and a floor scrubber.
Engineered Design:
- Compact 22.5 lbs. design
- 1/8 HP Dual Motors
- Exclusive Mag-LockTM brush and driver attaching system
- Durable resin cover over steel frame for reliable performance
- Quiet belt drive power
- Simple operator switch for both hand or foot operation
- 35 ft., (16-3) 2-piece commercial with cord lock
- Wide selection of drivers & specialty brushes
- Optional standing handle KIT3062
- UL / CUL listed components for safe performance
C3 Resurfacer
Dual-Speed Floor Machine
Restoration, Polishing, Scrubbing
C3 Resurfacer Dual-Speed takes advantage of innovative engineering and modern design to set new records in production and user safety. The unique “Floating Head” handle carriage design provides 100% contact with the floor and steers the Merlin in forward and backward movement – unlike the side-to-side movements of swing buffers.
The C3 Resurfacer Dual-Speed draws 1/3 less amps than standard machines. Strip and scrub floors at 165 RPM. Buff and polish at 300 RPM.
Power
- 5 HP 2-speed rectified DC motor
- Hi-Lo 2-speed toggle switch mounted on side of motor
- 115V, 50/60 Hz power (230V optional)
- 50 ft., (12-3) 2-piece industrial power cord with cord lock
